Are you a Xbox fan and looking forward to learn how to take apart xbox one controllers? Well, this article can surely help you in this regard. These devices are manufactured by Microsoft and manufactured with the intention of letting the users interact with their favorite games using their television sets. However, as they can be used by people across the world, many people are getting confused about the procedure of removing the controller so that they can use it with their original game consoles.
websitepin is very useful to know, many guides online will piece of legislation you approximately websitepin, however i recommend you checking this websitepin . I used this a couple of months ago as soon as i was searching upon google for websitepin
In this article, we will provide you with the step-by-step instructions on how to take apart an Xbox One controller. The first thing that you should keep in your mind while removing it is the Xbox One remote control. You can easily find it amongst the gaming devices or even at the office locker. Once you have got hold of the controller, pull out the battery from the connector behind the power button. This controller has a D Pad, an A Stick and a T Pad.
Carefully lift the D Pad and the stick from the back. Then, gently push down the center of the controller so that the metal frame is released from between the buttons and the metal frame. Remove the screws from the back of the Xbox One controller and then grasp the D Pad with your hands. It is very important that you must grasp the D Pad firmly since if you fail to do so, the screws may come out and you may damage your X-Box One controller. With the help of the screwdriver, you can remove the D Pad from the back of the controller. Care must be taken while removing the screws as you may break some parts of the Xbox One controller if not done properly.
How to Take Apart Xbox One Controllers
The next step in learning how to take apart Xbox One controllers is to unplug the power from the controller and remove the antenna cable from the connectors. Now, your X-Box One is ready for some disassembling. Care must be taken while removing the screws because if you break any of the screws, the wireless router and your wireless controller may get damaged. Care must also be taken while removing the screws on the back of the X-Box One. Lastly, disconnect the batteries of the wireless controller and turn on the power to see whether the wireless device is working properly.
One by one, unplug the wires of the controller and put them in your d Pad and A-Stick. Care must be taken while removing the screws of the X-Box One controller, as you may break some parts of the wireless device if not done properly. Once all the screws are removed, unplug the wires and put them in the d Pad and A-Stick. Your X-Box One is now ready for some disassembling. If your X-Box needs a new cable for instance, then you need to connect the new cable in the slot provided with the controller.
Now that all the parts of the X-Box controller have been removed, use your D-Lubax and pry tool to open up the plastic covering of the wireless device. This will allow you to remove the screws provided with the wireless controller. Your X-Box One will come apart in a similar manner. However, you will need a special tool to hold your Pry tool in place while working on the wireless device, such as the Lazy Suspects pry tool.
Once all the screws are removed, take apart all the parts of your X-Box One, starting with the main electronic board. You will find that the mainboard has a black matte finish, which makes it easier to spot wires and cables. Locate the analog sticks (yellow circle) and the microprocessor chips (green circle). After you have located the analog sticks, you will see that they are held in place by two small clips.
If you take apart your controller, you will find that there are metal clips on each side of the d-pad ring, which hold the microprocessor chips firmly in place. Remove the two clips, which will loosen the microprocessor chips from the d-pad ring. Then, use your Phillips screwdriver to pry the d-pad away from the rest of the console, which will allow you to remove the plastic protective cover for your X-Box One. With your X-Box One controller out of the box, you will see that the wires are routed to the front and rear of the console, while the d-pad ring also houses the power and buttons for your controller.
Thank you for reading, If you want to read more blog posts about how to take apart xbox one controller do check our site - Worldofgramophones We try to write the site bi-weekly